Provide adequate ventilation if dusts are created. Precautions for Safe Handling: Avoid creating dust. Scrap can be collected for recycling.Įnvironmental Precautions: Do not allow to enter drains or to be released to the environment. Place in a closed container for further handling and disposal.
Methods and Materials for Containment and Cleaning Up: Sweep or scoop up. Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate respiratory and protective equipment specified in section 8.
Nickel chromium full#
Special Protective Equipment and Precautions for Firefighters: Full face, self-contained breathing apparatus and full protective clothing when necessary. May emit metal oxide fumes under fire conditions. Small chips, fine turnings and dust from processing may be ignitable. Specific Hazards Arising from the Material: This product does not present fire or explosion hazards as shipped. Unsuitable Extinguishing Media: No information available. Indication of Immediate Medical Attention and Special Treatment: No other relevant information available.Įxtinguishing Media: Use suitable extinguishing media for surrounding material and type of fire. Most Important Symptoms/Effects, Acute and Delayed: May cause irritation. Seek medical attention if symptoms persist. Seek medical attention if symptoms persist.ĮYES: Flush eyes with lukewarm water, including under upper and lower eyelids, for at least 15 minutes. SKIN: Remove contaminated clothing, brush material off skin, wash affected area with soap and water. Never induce vomiting or give anything by mouth to an unconscious person. INHALATION: Remove to fresh air, keep warm and quiet, give oxygen if breathing is difficult.
Nickel chromium skin#
Subsequent operations such as grinding, melting or welding may produce potentially hazardous dust or fumes which can be inhaled or come in contact with the skin or eyes. General Measures: Under normal handling and use, exposure to solid forms of this material present few health hazards. GHS Classification (.1200): Not classified as hazardous You need JavaScript enabled to view it.Įmergency: Infotrac 80 (US) or 35 (24 hour) The alloy is also used for components exposed to corrosive attack from 1100 to 1800 deg F.Product Name: Nickel Chromium Alloy - pieces, shot, pellets, rod, wire, targetĮmail: This email address is being protected from spambots. Typical applications include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. 800HT can be welded by the common techniques used on stainless steels.
When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. 800HT will not become embrittled even after long periods of usage in the 1200-1600 deg F range where many stainless steels become brittle. It has excellent resistance to carburization, oxidation and nitriding atmospheres. The alloy is usually dual certified and combines the properties of both forms. Incoloy 800 H has further modifications to the combined titanium and aluminum levels (0.85 to 1.2%) to ensure optimum high temperature properties. The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties. The higher strength results from close control of carbon, aluminum and titanium contents in conjunction with a high temp anneal. A nickel-chromium -iron alloy having similar basic composition as Incoloy 800, with significantly higher creep rupture strength.
0 kommentar(er)
